A Ductile Iron Pipe Manufacturer was using our conventional product, 500*5*38 COW wheel with Al- Oxide and buying approximately 1500 to 1600 wheels to cut Ø 800 and 600 Di pipe for only One Line and the investment cost [...]

A tool manufacturer in Netherlands, ordered Topline abrasives from India, used in a 5-Axis Tool Grinding Machine and compared it against a competitors product. The component was Carbide End Mills for resharpening. The abrasive features under both brands were similar. [...]

A customer who is a manufacturer of air compressors and pneumatic tools, was using a competitor abrasive for a WMW machine. This abrasive was a gear with a wheel life of 16 gears, with a surface finishing of 0.6 uRa [...]

An automobile manufacturer was using a competitor’s abrasive for crank pin grinding. The dressing frequency was every two pins and the surface finish was RZ-3.3 Max. The wheel life is 5944 pieces. We recommended the same product under Topline. The [...]

An Engine Valve Customer was using a competitor’s Centreless Grinding Wheels 500*100*304.8, with a wheel life of 30,000 minutes approximately. Material Removal with their wheel was 0.2 and 0.4, and the dressing frequency- after 80 jobs. We recommended Topline Centreless [...]

A manufacturer of castings products and foundry equipment was using a competitor’s abrasive products for a Swimfram Grinder-05. This abrasive was a crack cage with a diameter of 393, and weight of 18.69 kg. The material removed was 0.13 kg [...]